Here are some areas that bats commonly are removed from…

One of the number one entry points for bats is through the eaves or soffits. Generally this is at the point of intersection where 2 roof lines come together. Often there are construction gaps because the roofers leave openings to lay the shingles under so no bare wood is showing. Well in reality they are suppose to be back flashed but 99% of the time they are not. Bat removal from eaves is done with an exclusion tube or bat netting. Bats will fly out but not be able to return.
If eaves are the number one point of entry then gable vents are a close second. Bats will land on the louvers and hang on the interior screen. Some of the older homes may not even have screen behind the louvers. If there is no screen the bats have easy access into your attic. Even if the vents are screened doesn’t mean the bats cannot gain entry into the attic. Bats will roost on the thin window screen behind the louvers and rot the screen away. Once the feces and urine build up it will eat right through the screen. As the air flow moves through the gable it will bust the screen wide open. Thus bats have free opportunity to fly right into your attic.

Bats are removed from gables a few different ways…

  1. You may either remove them by hand if the louvers are far enough apart. You have to wear gloves and be comfortable on a ladder. This really isn’t a recommended way to get rid of the bats from the gable vents.
  2. If the bats in the gable vent is a recent problem and the screen from the inside is intact you may want to consider this option: From inside the attic spray water onto the bats. The bats will fly out. Once they are out screen over top of the lovers to prevent the return. Its also important to make sure any other openings on your home are sealed as well.
  3. The third option and most effective is to install screen over top of the louvers where the bats are roosting. Leave one corner open so you can install an exclusion device. The bats will fly out but not get back in. You still have to make sure the rest of the home is sealed tight.
We find bats roosting under shingles all the time. Shingles get nice and warm for the bats to live under during the summer. Bats can be removed from underneath shingles by hand but most of the time they’re hard to get at. We have been on bat removal projects with slate top shingles, cedar shake shingles, steal roofs, and California style roofs.

Slate Rock: We once worked on Monastery home in Lake Orion with over 10,000 bats living it. This was a difficult project but nevertheless one we were willing to take on. We used a roofing caulk to seal around all of the tiles. Not an easy task but one that had to be done.

Cedar shake: style homes can be difficult as well. Generally it is the ridge cap that possesses the most trouble. Cedar shake ridge caps are mostly open to the outside with no screen. It’s import for these roofs to ventilate properly. We screen all the caps from inside the attic using a 1/4″ hardware cloth. But before we can do this we have to lay bat netting over top of the ridge cap so the bats can get out but not return. A lot of homes in Fenton, MI have this style roof.

Steal roof tops: are hard to work on. They are very slippery and require advanced safety equipment. Many times the bats will enter or roost under the grooves where the steal roof pieces meet with one another. A lot of times we seal in between all the grooves so the bats can not enter into the attic or home.

Cailifornia Style: In Petoskey, MI we removed bats from this style home. The bats on these roofs will enter through the eaves, but mostly through the ridge vents. Here we have to lay bat netting over the vents so the bats can get out but not back in. Once the bats are excluded all of the ridge vent caps have to be undone and screened underneath. Once we screen underneath them we nail the caps back on.

In recent years we have found ridge vents to be a major problem when dealing with bats. There are different styles of ridge vents. Metal ridge caps, plastic ridge caps, or interwoven style.

Plastic ridge caps: may be the best for airflow but they are absolutely horrible when trying to prevent bats from entering the attic. Plastic ridge caps like cobra style can be effective bat proofing vents if installed properly. There must be a screen underneath and the gutter edge of the vent should be secured to the roof line. If these caps are cut too long they will present a wave to them allowing for bats to enter through open areas in the ridge cap. Plastic also heats up on the hottest days of the year forcing the plastic to return to its original state which is flat. Roof tops are not flat and neither should the ridge caps.

Metal ridge caps: will lose the rubber end pieces letting the bats right in through the end caps.

Interwoven ridge caps: Maybe the best type of ridge cap to use to deter bats would be the interwoven style. Maybe not the best for ventilation but definitely the best to keep bats out. Unless the cap is damaged bats can not get through them.

Bat removal from ridge vents is done through an exclusion process. The entire ridge vent is sealed, yet still open for venting. One way doors are installed to exclude any preexisting bats from their roost. One way doors are left up until all bats are excluded. Once the bats are gone the rest of the ridge vent can be fixed.

Is there a bat hanging over your door?

Call an expert to remove it by hand. If this isn’t an option for you then try a couple of techniques to keep the bats from hanging. Tape or staple aluminum foil or metal flashing to the area where they are hanging. The bats will try to hang on it but wont be able to grip onto it. Also when they give off their high frequency pitch it will reflect right off of the aluminum and deter them from landing. Battery operated motion lights sometimes do the trick. The bats fly in and the light kicks on. Bats can be sensitive to light and when it flashes in their eyes they will turn around and fly else where. Another thing you may try is cleaning the areas where the bats are hanging with ammonia. Not only will it clean off the urine staining it will get rid of the odor. Bats are attracted to there odor they leave behind.

We provided bat removal services through out the state of Michigan. We can handle all situations when it comes to bat removal. Removing bats from vents, shingles, eaves, and door ways are our specialty. If your looking for a reputable Bat Removal Company in Michigan, Consider The Bat Specialists of Michigan. We specialize in this service and can take care of your bat removal problem today.

Bat Removal in Livingston County, MI

Brighton, Fowlerville, Howell, Pinckney, Whitmore Lake and all surrounding Livingston County areas.

Bat Removal in Genesee County, MI

Burton, Clio, Davison, Fenton, Flint, Flushing, Goodrich, Grand Blanc, Linden, Montrose, Mount Morris, Ottisville, Swartz Creek and all surrounding Genesee County areas.

Bat Removal in Lapeer County, MI

Almont, Attica, Clifford,Columbiaville, Dryden, Imlay City, Lapeer, Metamora, North Branch, Otter Lake and all surrounding Lapeer County areas.

Bat Removal in Washtenaw County, MI

Ann Arbor, Barton Hills, Chelsea, Dexter, Manchester, Milan, Saline, Ypsilanti and all surrounding Washtenaw County areas.

Bat Removal in Monroe County, MI

Carleton, Dundee, Estral Beach, Luna Pier, Maybee, Monroe, Petersburg, South Rockwood, and all surrounding Monroe County areas.

Bat Removal in Wayne County, MI

Canton, Livonia, Northville, Plymouth, Wayne, Westland and all surrounding Wayne County areas.

Bat Removal in Oakland County, MI

Auburn Hills, Berkley, Beverly Hills, Bingham Farms, Birmingham, Bloomfield Hills, Clarkston, Clawson, Commerce Twp., Farmington, Farmington Hills, Ferndale, Franklin, Holly, Madison Heights, Milford, Novi, Oak Park, Ortonville, Pontiac, Rochester, Rochester Hills, Royal Oak, South Lyon, Southfield, Troy, Walled lake, Waterford, Wixom, West Bloomfield, Wolverine Lake, and all surrounding Oakland County areas.

Bat Removal in Macomb County, MI

Armada, Center Line, Chesterfield, Clinton, Eastpointe, Memphis, Mount Clemons, New Baltimore, New Haven, Romeo, Saint Claire Shores, Shelby, Sterling Heights, Utica, Warren, and all surrounding Macomb County areas.

Bat Removal in Clinton County, MI

Dewitt, Eagle, Elsie, Fowler, Ovid, Maple Rapids, St. Johns, Westphalia, and all surrounding Clinton County areas.

Bat Removal in Eaton County, MI

Bellevue, Charlotte, Dimondale, Eaton Rapids, Grand Ledge, Mulliken, Olivet, Potterville, Sunfield, Vermontville, Waverly and all surrounding Eaton County areas.

Bat Removal in Ingham County, MI

Dansville, East Lansing, Lansing, Leslie, Mason, Okemos, Stockbridge, Webberville, Williamston and all surrounding Ingham County areas.

Bat Removal in Shiawassee County, MI

Bancroft, Byron, Corunna, Durand, Lainsburg, Lennon, Morrice, New Lothrop, Owosso, Perry, Vernon and all surounding Shiawassee County areas.

Bat Removal in Jackson County, MI

Jackson, Grass Lake and all surrounding Jackson County areas

Bat Removal in Bay County, MI

Bay City and surrounding areas

Bat Removal in Midland County, MI

Midland and surrounding areas

Bat Removal in Saginaw County, MI

Birch Run, Chesaning, Frankenmuth, Merrill, Oakley, Saginaw, St. Charles, Zilwaukee and all surrounding Saginaw County areas.

Bat Removal in Tuscola County, MI

Akron, Caro, Cass City, Fairgrove, Gagetown, Kingston, Millingston, Reese, Unionville, Vassar, and all surrounding Tuscola County areas.